One of the greatest ways to get your family or friends together to unwind, laugh, and create heartwarming memories is to host a backyard cookout. However, one disadvantage is having to clean the grill of oil and grime.
Not only is grilling on a dirty BBQ unsettling, but it poses a health risk. When using a dirty BBQ, the accumulation of food particles and grease is the main reason for flare-ups. It can also interfere with your grilling experience because a dirty cooking surface shares an unpleasant flavor with your food. But don’t worry, here’s how to clean BBQ grill with vinegar and baking soda.
Guide How To Clean BBQ Grill With Vinegar And Baking Soda
To save time and effort when cleaning a very unclean grill, soak its grate in vinegar and baking soda for a whole night. This will help remove any stubborn, grime or caked-on grease that doesn’t come off straight away.
Try these guides on how to clean BBQ with vinegar and baking soda.
Needed Materials:
1.   Aluminum foil
2.   Baking soda
3.   Bucket
4.   Rubber gloves
5.   Sponge or scrub brush
6.   Spray bottle
7.   White vinegar or apple cider vinegar
8.   Water
Step-by-Step Process On How To Clean BBQ Grill With Vinegar And Baking Soda
Step #1: Get The Grill Ready
Before you begin cleaning, make sure the BBQ grill is cool. Remove the grill grates and all other parts that can be removed, such as flavorizer bars or trays. Any big food or ash particles should be scraped off the grill grates and interior using a barbecue brush.
Step #2: Clean The Grill Grates
To prepare a cleaning paste, mix baking soda with a small amount of water. The consistency should be thick and spreadable. Put a lot of this paste on the grill grates, paying special attention to places where there is a lot of grease accumulation. Allow the paste to sit on the grates for 15 to 30 minutes in order to eliminate any dirt. This is going to help in the baking soda’s ability to dissolve food residue and grease.
Step #3: Sprinkle Some Vinegar Over It
Use a spray bottle loaded with white vinegar to spritz the grates and the baking soda paste-covered areas once the baking soda has had time to settle. Grease and dirt that are difficult to remove will be lifted by the bubbling action created when the vinegar and baking soda mixture. For a few minutes, let the mixture bubble. If needed, you can stir the mixture using a brush or sponge.
Step #4: Clean The Grates
Scrub the grill grates and other areas where the paste and vinegar were applied using a scrub brush or sponge. Pay attention to any oily areas that remain. The vinegar functions as a degreaser and disinfectant, while the baking soda’s abrasiveness contributes to breaking down the grease. Baking soda and water can be combined to create a more concentrated solution for tough stains, or you can sprinkle baking soda straight onto the grates before washing.
Step #5: Clean The Inside Of The Grill
You may also clean the grill’s interior by using a mixture of vinegar and baking soda to remove any accumulated ash or grease. Just dust the surfaces with baking soda and spritz with vinegar. After ten to fifteen minutes, scrub it. You can use a moist cloth soaked in vinegar and dusted with baking soda for larger, more difficult-to-reach spots.
Step #6: Clean The Grates
Rinse the grill grates well with water after scrubbing to get rid of any remaining grease, vinegar, or baking soda. To make sure the grates are spotless, use a fresh towel to wipe them off if needed.
Step #7: Clean The BBQ Grill’s Outside
Remember that the BBQ grill’s outside needs to be cleaned. To get rid of germs, oil stains, and grime, apply a little solution of vinegar and water to a spray bottle and use a cloth to clean the exterior surfaces.
Step #8: Put The Grill Back Together
Reassemble the grill when everything has been cleaned and dried. Make sure all components, including the grates, are positioned correctly.
Step #9: Use Aluminum Foil To Clean
Once the grill grates are clean and dry, go an extra step to help remove grease from them by balling up some aluminum foil and using it to scrape the grates. You can brush off any last bits of food that have become stuck by using the foil as an abrasive.
Tips For Best Results
·    If you have a sensitivity to cleaning solutions or the grease is very difficult to remove, put on rubber gloves.
·    You can repeat your cleaning steps or leave the vinegar and baking soda for up to an hour if the grease is extremely stubborn.
·    Cleaning after every BBQ session will help avoid grease accumulation and make it easier to clean in the future.
·    Your barbecue will smell better after using vinegar to help neutralize odors.
With this easy yet efficient cleaning technique, you can maintain the best possible condition for your BBQ without resorting to hazardous chemicals.
Conclusion
Your BBQ grill will stay clean and ready for your next grill if you follow the above steps on how to clean BBQ grill with vinegar and baking soda.
Although it’s not the most glamorous chore, cleaning a BBQ grill is essential if you intend to cook on it. You can hire a BBQ grill cleaner to complete the work if you are unable to do it yourself. Professional BBQ cleaners in your area can clean your grill and leave it in top grilling shape so you may use it again soon!
It will be easier to clean your BBQ grill and avoid oil buildup if you clean it after a few uses. Before scrubbing again, let the paste and vinegar mixture lie for up to an hour if you come across extremely difficult-to-remove areas.
Link
https://www.airtasker.com/au/guides/how-to-clean-bbq-grill
https://www.thekitchn.com/best-method-cleaning-grill-grates-23166960
https://www.armandhammer.com/articles/how-to-clean-a-grill
